Loading ...
Loading ...
Loading ...
Function of Drive Away Assist
Drive Away Assist can reduce the severity of an
impact when pulling away. If an obstacle is
detected in the direction of travel, the vehicle's
speed is briefly reduced to approx. 1 mph
(2 km/h). If a critical situation is detected, the
È symbol appears on the camera image of
the multimedia system.
&
WARNING Risk of accident caused by
limited detection performance of Drive
Away Assist
Drive Away Assist cannot always clear ly iden‐
tify objects and traffic situations.
In such cases, Drive Away Assist might:
R
Warn you without reason and limit the
vehicle speed.
R
Not warn you or not limit the vehicle
speed.
#
Always pay careful attention to the traf‐
fic situation; do not rely on Drive Away
Assist alone.
#
Be prepared to brake or swerve as nec‐
essary, provided the traffic situation
permits and that it is safe to take eva‐
sive action.
Drive Away Assist is only an aid. It is not a sub‐
stitute for your attention to the surroundings.
The responsibility for safe maneuvering and
parking remains with you. Make sure that no
persons, animals or objects etc. are in the
maneuvering range.
A risk of a collision may arise in the following sit‐
uations, for example:
R
If the driver mixes up the accelerator and
brake pedals.
R
If the wrong gear is selected.
The Drive Away Assist function is active under
the following conditions:
R
If Parking Assist PARKTRONIC is activated.
R
Every time the gear is changed to k or h
when the vehicle is at a standstill.
R
If the detected obstacle is less than approx.
3.3 ft (1.0 m) away.
R
If the maneuvering assistance function is
activated in the multimedia system.
System limitations
Drive Away Assist is not available on inclines.
Function of Cross Traffic Alert
%
Also read the instructions on Blind Spot
Assist (→ page 218).
Vehicles with Blind Spot Assist: drivers can
also be warned of any crossing traffic when
backing up out of a parking space. If a critical
situation is detected, symbol
1 appears in the
multimedia system display. If the driver does not
respond to the warning, the vehicle's brakes can
be applied automatically. To do this, the function
uses the radar sensors in the bumper. The area
adjacent to the vehicle is continually monitored.
If the radar sensors are obstructed by vehicles
or other objects, detection is not possible.
The Cross Traffic Alert function is active under
the following conditions:
R
If Blind Spot Assist is activated.
R
If the vehicle is backing up at walking pace.
214
Driving and parking
Loading ...
Loading ...
Loading ...