Loading ...
Loading ...
Loading ...
j
Park position
k
Reverse gear
i
Neutral
h
Drive position
Engaging reverse gear R
#
Depress the brake pedal and push the E-
SELECT selector lever upwards past the first
point of resistance.
The transmission position display shows k
in the multifunction display.
Engaging neutral N
#
Depress the brake pedal and push the E-
SELECT selector lever up or down to the f irst
point of resistance.
The transmission position display shows i
in the multifunction display.
Subsequently releasing the brake pedal will
allow you to move the vehicle freely, e.g. to push
it or tow it away.
If you want the automatic transmission to
remain in neutral i
even if the ignition is
switched off:
#
Start the vehicle.
#
Depress the brake pedal and engage neutral
i.
#
Release the brake pedal.
#
Switch off the ignition.
%
If you then exit the vehicle leaving the
SmartKey in the vehicle, the automatic trans‐
mission remains in neutral i.
Engaging park position P
#
Observe the notes on parking the vehicle
(→ page 156).
#
Depress the brake pedal until the vehicle is
stationar y.
#
When the vehicle is stationary, press button
j.
Park position is only engaged when the trans‐
mission position display j is shown in the
multifunction display. If no transmission posi‐
tion display j appears, secure the vehicle
to prevent it from rolling away.
Park position j is engaged automatically if one
of the following conditions is met:
R
you switch off the ignition when the vehicle
is stationary and the transmission is in posi‐
tion h or k.
R
you open the driver's door when the vehicle
is stationary or when driving at a very low
speed and the transmission is in position h
or k.
150
Driving and parking
Loading ...
Loading ...
Loading ...