Loading ...
Loading ...
Loading ...
High-beam headlamps
#
To switch on: turn the light switch to the
L or à position.
#
Press the combination switch beyond the
point of resistance in the direction of arrow
1.
When the high beam is activated, the indica‐
tor lamp for low beam L is deactivated
and replaced by the indicator lamp for the
high beam K.
#
To switch off: move the combination switch
back to its starting position.
High-beam flasher
#
Pull the combination switch in the direction
of arrow 3.
Turn signals
#
To indicate briefly: press the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding indicator will flash three
times.
#
To indicate permanently: press the combi‐
nation switch beyond the point of resistance
in the direction of arrow 2 or 4.
Vehicles with Active Lane Change Assist
The Active Lane Change Assist can:
R
lengthen turn signal operation for the
duration of the lane change if the driver
has activated the indicator.
R
automatically activate the turn signal indi‐
cator if the driver indicated to turn in that
direction immediately beforehand but a
lane change was not immediately possi‐
ble.
Activating/deactivating the hazard warning
lights
#
Press button 1 .
Light and visibility
117
Loading ...
Loading ...
Loading ...