Loading ...
Loading ...
Loading ...
Page 100
Restarting the TV
You can restart the TV when necessary. Restarting has the same effect as unplugging the
TV power and then plugging it in again.
To restart the TV, navigate to Settings > System > Power, and then select System restart.
Highlight Restart, and then press OK to confirm restart.
While the TV restarts, the screen goes dark for a few seconds, and then displays the
startup screen for a few more seconds. When the restart operation completes, the TV
displays the activity you selected in Power on settings
.
Resetting the TV
You can choose to reset only the TV picture and audio settings to their original values, or
perform a full factory reset to return the TV to the state it was in when you first unpacked
and turned it on.
Reset audio/video settings
To reset only the TV picture and audio settings to their original values, navigate to
Settings > System > Advanced system settings > Factory reset, and then highlight Reset
TV audio/video settings. Read the information on the screen to make sure you
understand what the reset operation does.
To proceed with the reset operation, press PLAY/PAUSE three times in a row.
Factory reset everything
A full factory reset returns the TV’s settings to their original state and removes all
personally identifiable information from the TV. When finished, you must repeat Guided
Setup, reconnecting to the Internet, re-linking your Roku account, and reloading any
streaming channels. You also must repeat Antenna TV setup and input configuration.
Factory reset is the recommended choice if you want to transfer the TV to another owner,
and it is the only choice if you want to switch from store mode to home mode (if you
inadvertently selected store mode during Guided Setup).
To perform a factory reset, navigate to Settings > System > Advanced system settings >
Factory reset, and then highlight Factory reset everything. Read the information on the
screen to make sure you understand what this reset operation does.
Loading ...
Loading ...
Loading ...