Loading ...
Loading ...
Loading ...
- 36 -
[
Brightness at Low li
ght
]:
Via a slider you
can change the brightness with a low light
input
[Brightness at Intense Light]: Via a slider
you can change the brightness with an
intense light input
[Light sensor Sensitivity]: Via a slider you
can change the light sensor sensitivity
Note: Above menus are only accessible
when [External Clock] is set to [On]
Navigate to the [Welcome Logo] menu
You will see below items:
o [Off]: You can disable the Welcome Logo
o [On]: You can enable the Welcome Logo
The best resolution needs to be 1920x1080 for
xxHFL5011 and 3840X2160 for xxHFL7011
How to upload the file in TV:
o Create your WelcomeLogo.jpg, this file should
be below 16MB. If the file cannot be played by
the TV it will not be loaded during the cloning
process
o Save the file into to following folder on your
USB device (note the case sensitivity):
/TPM1532HE_CloneData/MasterCloneData/
WelcomeLogo/WelcomeLogo.jpg (xxHFL5011)
/TPM1531HE_CloneData/MasterCloneData/
WelcomeLogo/WelcomeLogo.jpg (xxHFL7011)
o Switch ON the TV, insert the USB with the new
content
o Go to [Professional settings] [Upgrade and
Clone] [Clone USB to TV] menu and press “OK”
to upload the picture in the TV
o Once done, exit [Professional settings] and
reboot the TV and check your changes
Note: You can do this using CMND as well
Loading ...
Loading ...
Loading ...