Loading ...
Loading ...
Loading ...
- 24 -
Navigate to the [RF Upgrade Settings]
menu and open it
You will see below items:
o [Frequency]: The frequency for CMND
playout can be modified in this menu
Note: Default this should be set to 498
MHz. If for some reason you need to
change this frequency, it’s
recommended to use a frequency
between 474 MHz and 858 MHz in steps
of 8MHz (DVBT-range).
When an RF upgrade happens, the TV
will first do a scan on the frequency set
here. If nothing is found it will scan
between 474 MHz and 858 MHz in steps
of 8MHz. So if you do a playout on
another frequency as set in the TV, the
TV will still find it.
6.4 Switch on settings
Navigate to the [Switch On Settings] menu
and open it
You will see the screen on the left
In this menu you will be able to set all
Switch on settings, these are the menu
items that a guest can change, the values
you set here are the settings applied when
the guest wakes up the TV
6.4.1 Channel Settings
Navigate to the [Channel Settings] [Switch
On Channel Filter] menu and open it
You will see a list of channel filters, your
selection will be the default selected
channel filter when opening the channel
list
This list also contains the theme’s
Note: The list you see in the screenshot is
depending on the installed content
Loading ...
Loading ...
Loading ...