Loading ...
Loading ...
Loading ...
- 108 -
3 (When [Microphone Gain] is selected in Step 2)
Select an item.
(When [Frequency Response] is selected in Step 2)
Touch / to adjust.
≥ Before recording, check the effect you have selected with a headphone set, etc.
≥ The high frequency range (dB) and low frequency range (dB) can be adjusted.
≥ If noises such as the sound caused by the wind bother you, set the low frequency range to
[LowCut].
≥ To end the adjustment, touch [EXIT].
(When [Directional] is selected in Step 2)
Select an item.
4 Touch [EXIT].
≥ appears on the screen.
≥ Depending on the recording condition or sound quality, the desired effect may not be achieved.
≥ The setting becomes [Auto] when you have connected an external microphone or audio device
*
.
* You can connect audio equipment when using the / .
≥ (When [Music] or [Festival] is set)
The volume of the recorded sounds may be lower than that of the sounds recorded with [Auto].
≥ (When [Speech] or [Nature] is set)
Sounds recorded with these effects are less realistic than those recorded with [SURROUND] or
[STEREO MIC] in [MIC SETUP].
You can switch the channel number setting of the built-in microphone.
≥ Set [REC FORMAT] to [AVCHD]. (l 101)
≥ [2ch] will be selected in the following cases:
j When [REC FORMAT] is set to a setting other than [AVCHD]
j When you have connected an external microphone or audio device
*
* You can connect audio equipment when using the / .
[Normal]: Adjusts the sound quality automatically.
[Attenuate]: Records sounds of very loud scenes at appropriate volume.
[SURROUND]/[STEREO]: Records sounds with the setting of [MIC SETUP] ([SURROUND] or
[STEREO MIC]).
[MONO]: Records sounds from all directions without setting specific
directivity.
[5.1ch/2ch]
: [RECORD SETUP] # [5.1ch/2ch] # desired setting
[5.1ch]: Records with the 5.1ch.
[2ch]: Records with the 2ch.
WXF1 VXF1
MENU
WXF1 VXF1
HC-WXF1-VXF1-VX1-V800PP-DVQP1576_eng.book 108 ページ 2018年3月2日 金曜日 午前9時15分
Loading ...
Loading ...
Loading ...