Brother NC-2010P

User Manual - Page 70

For NC-2010P.

PDF File Manual, 143 pages, Read Online | Download pdf file

NC-2010P photo
Loading ...
Loading ...
Loading ...
USER’S GUIDE
5–8
LAN Server/Warp Server Configuration
Server Configuration:
1. Open the Templates folder on the OS/2 desktop.
2. Using the right mouse button, drag the Printer template onto the
desktop.
3. Type in any desired name for the printer from the Create a Printer
window.
4. Choose an unused port (for example, LPT3) to connect to the printer.
5. Choose the appropriate printer driver from the list.
6. Click Create and then OK.
7. If desired, indicate whether you want to share the printer.
Workstation Configuration:
On each workstation that you wish to print from, execute the following
step:
Go to the DOS or OS/2 command prompt and enter the command:
NET USE LPTx: \\NodeName\ServiceName
where "x" is the LPT port number (1 through 9), NodeName is the
NetBIOS Name of the print server (BRO_xxxxxx by default, where
"xxxxxx" is the last six digits of Ethernet address ) and ServiceName is the
service name of the Print Server (BINARY_P1 by default). For example:
NET USE LPT2: \\BRO_002477\BINARY_P1
Note
If you are using SMB on NetBEUI with old print server firmware (before
Version 3.59) use:
NET USE LPTx: \\Servername\Portname
where "x" is the LPT port number (1 through 9), servername is the
NetBIOS Name of the print server (BRO_xxxxxx_pp by default, where
"xxxxxx" is the last six digits of Ethernet address and "pp" is the port
name). For example:
NET USE LPT2: \\BRO_002477_P1\P1
Loading ...
Loading ...
Loading ...