Brother NC-2010P

User Manual - Page 131

For NC-2010P.

PDF File Manual, 143 pages, Read Online | Download pdf file

NC-2010P photo
Loading ...
Loading ...
Loading ...
APPENDIX
A-11
To define a new string, use the command:
SET SERVER STRING
number
string
where number is the number of the string (12 through 31) and string is the
desired string (must be enclosed in quotation marks).
A given string can include hexadecimal characters by preceding the value
with a “\” character. The next two characters after the “\” will then be
interpreted as the hexadecimal value of a character. For example, to specify
<ESC>E as string number 12, you would enter:
SET SERVER STRING 12 “\1BE”
Please note that when you associate a string number with a service, the new
string number completely replaces any previous string numbers. Also, if
you are using one of the predefined PostScript or PCL services, the new
string will nullify the language switching function of these services.
However, you can combine several string numbers together by preceding
the string number with “\FF”. For example, if you defined string number 21
as "\1B" (<ESC>), and string number 22 as “&l1O”, you can create a new
string number 23 that contains <ESC>&l1O (the PCL landscape mode
command) by entering:
SET SERVER STRING 23 “\FF\15\FF\16”
Note that the string numbers within the quotation marks are expressed in
hexadecimal when used with this command.
To associate a string with the service, use the following commands:
SET SERVICE
servicename
BOT
stringnumber
SET SERVICE
servicename
EOT
stringnumber
where servicename is the name of the service and stringnumber is the
number of the string as defined above. The first command (BOT) adds the
specified string to the beginning of the job, while the second command
(EOT) adds the specified string to the end of the job. A given service can
have both a setup and reset string associated with it.
To clear a string number, type:
CLEAR SERVER STRING
stringnumber
To clear a setup or reset string, set the string number to 1 (the null string):
SET SERVICE
servicename
BOT 1
SET SERVICE
servicename
EOT 1
You may enable or disable protocols that can access a given service with
the following commands:
SET SERVICE
name
LAT
ENABLED
SET SERVICE
name
IP
ENABLED
SET SERVICE
name
NETWARE
ENABLED
SET SERVICE name APPLE ENABLED
SET SERVICE name DLC ENABLED
SET SERVICE name Banyan ENABLED
SET SERVICE name NetBEUI ENABLED
Loading ...
Loading ...
Loading ...