Loading ...
Loading ...
Loading ...
CHAPTER 5 NetBIOS CONFIGURATION (NetBEUI and TCP/IP)
5–7
8. Enter any desired name for the Brother printer and press
Next
. For
example, you could call the printer “Networked Brother Printer”.
9. Select not Shared or Shared and Share Name and press
Next
.
10. Windows will now ask you if you wish to print out a test page, select
Yes
and then select
Finish
.
You are now ready to print. If necessary, you can share the printer on your
PC so that all print jobs are routed through your computer.
Adding a Second Network Direct Print Port
1. You do not need to re-run the installation program to add a new
NetBEUI port. Instead, press the
Start
button, select
Settings
, and open
the Printers windows. Click on the icon of the printer that you wish to
configure, select
File
from the Menu bar, and then choose
Properties
.
(Windows 95/98)
2. Click on the
Details
tab and push the
Add Port
button. In the Add Port
dialog, select the
Other
radio button and then
highlight
“Brother
NetBIOS port
”. Click
OK
and enter the port name. The default port
name is BNT1. If you have already used this name, you will get an error
message if you try to use it again, in which case use BNT2, etc… Once
you have specified the Port name, click the
OK
button. You will then
see the
Port Properties Dialog
. Enter the print server and port name of
the printer that you wish to print to and click
OK
. You should now see
the port that you have just created in the “
Print to the following port
”
setting of the printer driver.
(Windows NT4.0)
2. Click on the
Port
tab and push the
Add Port
button. In the Add Port
dialog, highlight
“Brother NetBIOS port
”. Click
New Port
and enter
the port name. The default port name is BNT1. If you have already used
this name, you will get an error message if you try to use it again, in
which case use BNT2, etc… Once you have specified the Port name,
click the
OK
button. You will then see the
Port Properties Dialog
.
Enter the print server and port name of the printer that you wish to print
to and click
OK
. You should now see the port that you have just created
in the “
Print to the following port
” setting of the printer driver.
Loading ...
Loading ...
Loading ...