Loading ...
Loading ...
Loading ...
3 Tap [Network] ® [MTU Settings].
4 Select the desired value and then tap [OK].
Remote access mode settings
Determines the protocol used when viewing camera images while away from home. This setting is set to
[UDP] by default and normally should not be changed. Select [TCP] if camera images are not displayed,
and [Loading...] is displayed for a long period when you are trying to view camera images.
1 From the [HomeHawk] app home screen, tap ® [Settings].
2 Tap [Access Point Settings] and select the desired access point.
3 Tap [Network] ® [Remote Access Mode].
4 Select the desired value and then tap [OK].
Home wireless network SSID features
The app remembers the SSIDs of wireless routers that your mobile device uses at home to connect to
the access point; it can remember 10 SSIDs, and saves them in the home wireless network SSID list. If
the list is full and you try to connect to the access point using a new SSID while at home, the app may
connect to the access point over the Internet even though you are at home, i.e., or will be
displayed at the top of the home screen. In this case, we recommend deleting unused SSIDs from the
home wireless network SSID list.
1 From the [HomeHawk] app home screen, tap ® [Settings].
2 Tap [Access Point Settings] and select the desired access point.
3 Tap [Home Wireless Network SSID].
4 Select the wireless router that you want to delete and then tap [Delete].
Deregistering devices
Deregistering mobile devices
1 From the [HomeHawk] app home screen, tap
® [Settings].
2 Tap [Deregistration] ® [Mobile Device].
3 Select the desired access point.
R A list of mobile devices registered to the selected access point is displayed.
4 Select the device that you want to deregister.
R A dialog is displayed asking whether you want to deregister the device.
5 Tap [OK].
Note:
R Refer to “Initial setup”, Page 14 if you want to register your mobile device again.
Deregistering access points
1 From the [HomeHawk] app home screen, tap ® [Settings].
2 Tap [Deregistration] ® [Access Point].
3 Select the device that you want to deregister.
R A dialog is displayed asking whether you want to deregister the device.
4 Tap [OK].
38
Using the app
Loading ...
Loading ...
Loading ...