Loading ...
Loading ...
Loading ...
System setup (overview)
There are 4 basic steps you need to perform in order to access the access point and your devices from
your mobile device.
Connections
¯
Connect your access point to a power outlet and to your wireless
router.
*1
Download
¯
Download the [HomeHawk] app to your mobile device.
Initial setup
¯
Use the [HomeHawk] app to register your mobile device to the access
point.
Register devices Add more mobile devices (smartphones and tablets), or cameras to the
system.
*1 Refer to the Installation Guide included with your access point for more information.
Note:
R For information about the setup for HD cameras, see page 57.
Downloading the [HomeHawk] app
Download information is available at the web page listed below.
{{"https://panasonic.net/cns/pcc/support/homehawk"|tolink("https://panasonic.net/cns/pcc/
support/homehawk")}}
Requirements
– Access point (KX-HNB700, KX-HNB705)
– A wireless router
– A compatible mobile device
Compatible mobile devices
Please check the latest information at the following supported page.
{{"https://panasonic.net/cns/pcc/support/homehawk"|tolink("https://panasonic.net/cns/pcc/
support/homehawk")}}
– iPhone and iPad (iOS 10.0 or later) or Android devices (Android 4.1 or later) (As of October 2017)
– Minimum recommended screen size: 1280´720 (screen content may not be displayed properly on
devices with smaller screens)
Note:
R The [HomeHawk] app may not function properly depending on the system environment, such as the
model of your mobile device, the peripherals connected to your mobile device, and the apps installed
on your mobile device. Bluetooth headsets are not supported by the [HomeHawk] app.
R The following Android devices are not compatible with the [HomeHawk] app.
– Android devices that are not supported by Google Play
– Android devices with limited hardware features
(Bluetooth, Wireless LAN, and microphone support are required.)
13
System setup
Loading ...
Loading ...
Loading ...