Dji A2 User Manual

Loading ...

0.5m<Distance<1cm

1. Turn on the transmitter, it begins to send signals after 1.5secs.

3.Press the LINK button, hold for 2secs, wait until the LED blinks Red .

4.Release the LINK button, the LED turns Green on after successfully linking.

Link Procedures

2.Power on the flight control system, configure the Receiver type as DR16 in

the Assistant software.

The DR16 Receiver is compatible with the Futaba transmitters which have optional FASS MODE MULT,

MLT2 or 7CH. Users can find out more available Futaba transmitters and configuration requirements

refer to the FAQ->The Transmitter setup of FUTABA.

B. DSM2 Satellite Receivers

If using DSM2 satellite Receivers, please follow the diagram for connection, set the Receiver referring to your

Receiver manual, and select the Receiver type as DSM2 in the Assistant software->Basic->R/C-> Receiver Type.

DSM2

satellite

Receiver

1. Power on the flight control system, the Transmitter should be turned off.

3.Press and hold the LINK button on the controller unit the LED blinks red and the

indicators on the Receivers blink too. Then release the LINK button the Receiver will

be ready for linking.

4.Press and hold the linking button on the Transmitter then turn on the Transmitter to

start linking, release the button after the Transmitter is displayed Linked or the

indicators on the Receivers are solid on.

Linking procedures

2.Set the Receiver type as DSM2 in the Assistant software.

5.The LED on the controller unit will be solid green on after linking successfully.

DSM2

satellite

Receiver

Notes for the DSM2 users:

 There is no need to enable the FailSafe function in the Transmitter. If the Receiver loses the signal

from the Transmitter, the controller unit will enter into FailSafe automatically, and the aircraft will

Loading ...

Dji A2 Flight Control System