A2 User Manual - Page 11

Loading ...

E. Traditional Receivers

If using Traditional Receivers, the DJI D-BUS Adapter is required. Please follow the diagram for connection, set

the Receiver referring to your Receiver manual, and select the Receiver type as D-BUS in the Assistant

software->Basic->R/C-> Receiver Type.

Traditional

Receiver

Important

· When you use a traditional receiver,

DJI D-BUS ADAPTER is required. Put

the switch to the “I” stop, and

power on the system, the LED should

be red on; otherwise, keep the switch

at “I” stop and then power cycle the

system.

· At the “I”stop, the D-BUS ADAPTER

is converting the PWM signal from

traditional receiver to S-BUS signal.

Notes for the traditional receiver users:

 When using the traditional receiver which doesn’t have endpoint adjustment operations to set

FailSafe in the U channel, the Go-Home switch is recommended and users can use it to trigger

the FailSafe.

 Configure the FailSafe function of your transmitter and receiver according to its instructions,

set the FailSafe position of the Go-Home switch in the position triggering the FailSafe function.

If it is configured correctly as mentioned above, the FailSafe function will be activated

automatically if the receiver loses the signal from the transmitter.

 Users can get more information about the FailSafe function referring to 3.1 FailSafe in this

manual and the help text in the Assistant software.

Loading ...