Loading ...
Loading ...
Loading ...
ENGLISH
80
Antenna settings for digital
satellite channels and searching
for channels automatically with
SCR system
Notes:
7
Your TV supports SCR system (Single
Channel Router). SCR (Single Channel
Router - EN 50494).
7
LNB settings described in the following
section require significant expertise on
satellite systems. Contact your authorised
dealer about this matter.
1 Press »
«.
2 Press »
>
« to select »Settings«.
3 Press »
V
« then »
>
« to select »Live TV« and
confirm with »
«.
– »LIVE TV« menu will be displayed.
4 Confirm »Channel Scan« with »
«.
– »Please make sure your antenna is setup
and plugged into your device« will be
displayed.
5 Confirm »Next« with »
«.
6 Press »
V
« or »
Λ
« to select the country and
press »
« to confirm.
7 Press »
V
« or »
Λ
« to select »Satellite« and
press »
« to confirm.
8 To delete the previously saved channels and
search, select »Yes«;
or
to continue searching without deleting the
channels, select »No, keep existing« and
press »
« to confirm.
9 Press »
V
« or »
Λ
« to select »Full« and press
»
« to confirm.
10 Press »
V
« or »
Λ
« to select the satellite you
want to search from the list and press »
«
to confirm.
– »Satellite Connection« will be displayed.
DETAILED CHANNEL SETTINGS
----------------------------------------------------
11 Press »
V
« to select »Single Cable« and
press »
« to set it to »ON«.
12 Press »
V
« to select »User Band« and press
»
§« or »$« to select the antenna socket
that is being used.
13 Press »
V
« to select »Band Frequency« and
confirm with »
«.
14 For band frequency, press »
<
«, »
>
«, »
V
«
or »
Λ
« to select the required numbers and
press »
« to move to the next character.
Enter the frequency and press »
8!« to
select »Next«.
Notes:
7
Use installation equipment supported /
suggested by your SCR Switch.
7
Other users / receivers connected to the
system may be affected if the specified user
band number and frequency are changed
during installation.
7
User band and User band frequency are
specified on the SCR switch used; and each
user / receiver must select a specified user
band and user band frequency.
7
With SCR satellite system, auto search by
several users / receivers at the same time
may cause problems.
15 Press »
V
« to select »Scan Mode« and use
»
§« or »$« to select the scan mode.
For free digital TV channels only, select
(Free); for paid digital TV channels, select
(Scrambled); for both, select (All).
16 Press »
8!« to start searching.
– »Search« menu will appear and channel
search will start.
– Channel search will take some time
depending on the number of the channels
to be searched.
17 Confirm »Done« with »
« to complete the
setting process and display the Home menu.
Loading ...
Loading ...
Loading ...