Loading ...
Loading ...
Loading ...
ENGLISH
72
Wireless network configuration
You have several ways to connect your TV to
your home network.
Automatic connection,
all data regarding connection settings
(»IP Address«, »Netmask«, »Gateway«
and »DNS«) are obtained from modem
automatically.
Depending on the router, you can use the
following options:
– Option “WPS-Button”
– Connection with WPS PIN;
– Connection with Network Password
1 B Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
NETWORK SETUP
-------------------------------------------------------------------------------------------
Technical requirements
Most home networks are Dynamic Networks.
If you have a dynamic network, you must use
a DSL modem that supports DHCP. Modems
and IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatically,
and thus you are not required to enter those
values manually.
Wireless WPS network connection by
pressing a button
1 Press » «.
2 Press »
>
« to select »Settings«.
3 Press »
V
« then »
>
« to select »Network«
and confirm with »
«.
– »NETWORK« menu will be displayed.
4 Press »
V
« to select »Join Network Using
WPS (Button)« and press »
«.
– »Press the Wi-Fi Protected Setup button on
your router.« will be displayed.
Network
JOIN NETWORK USING WPS (BUTTON)
Cancel
Searching for Wi-Fi...
Press the Wi-Fi Protected Setup
button on your router.
It may be called "WPS" or
contain this symbol:
5 Push the WPS button on your router.
– »Connected to Wi-Fi network
"Modem_1".« will be displayed and the
modem will be connected.
6 In the »NETWORK« menu, press »
8!« to
check status of the network connection.
– Network connection status will be
displayed.
7 Press »
« to return to the previous menu or
press »
« to return to »Home« menu.
Loading ...
Loading ...
Loading ...