Loading ...
Loading ...
Loading ...
Chapter 80 Networked AV Mode
XGS2220 Series User’s Guide
682
The following table describes the labels in this screen.
80.41 MAINTENANCE
This section explains how to configure the screens that let you maintain the firmware and configuration
files.
80.42 What You Can Do
• Use the Restore Configuration screen (Section 80.43 on page 682) to upload a stored device
configuration file.
• Use the Backup Configuration screen (Section 80.44 on page 683) to save your configuration for later
use.
• Use the Save Configuration screen (Section 80.45 on page 684) to save the current configuration
settings to a specific configuration file on the Switch.
• Use the Firmware Upgrade screen (Section 80.46 on page 684) to upload the latest firmware.
• Use the Reboot System screen (Section 80.47 on page 685) to restart the Switch without physically
turning the power off and load a specific configuration file.
• Use the Tech-Support screen (Section 80.48 on page 686) to create reports for customer support if
there are problems with the Switch.
80.43 Restore Configuration
Use this screen to restore a previously saved configuration file from your computer to the Switch.
Table 364 SECURITY > Storm Control
LABEL DESCRIPTION
Active Enable the switch button to enable traffic storm control on the Switch. Disable the switch
button to disable this feature.
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Broadcast (pkt/s) Select this option and specify how many broadcast packets the port receives per second.
Multicast (pkt/s) Select this option and specify how many multicast packets the port receives per second.
DLF (pkt/s) Select this option and specify how many destination lookup failure (DLF) packets the port
receives per second.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields.
Loading ...
Loading ...
Loading ...