Loading ...
Loading ...
Loading ...
Chapter 59 VLAN Mapping
XGS2220 Series User’s Guide
447
Figure 355 SWITCHING > VLAN Mapping > VLAN Mapping (Stacking Mode)
The following table describes the labels in this screen.
59.3 VLAN Mapping Setup
Click the SWITCHING > VLAN Mapping > VLAN Mapping Setup to display the screen as shown. Use this
screen to view and configure the VLAN mapping rules.
Table 223 SWITCHING > VLAN Mapping > VLAN Mapping
LABEL DESCRIPTION
Active Enable the switch button to enable VLAN mapping on the Switch.
SLOT This field appears only in Stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This field displays the port number. In Stacking mode, the first number represents the slot ID and
the second is the port number. Please note that the default stacking ports (the last four ports of
your Switch) cannot be configured. They are reserved for stacking only.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable the VLAN mapping feature on this port. Clear this check box to
disable the VLAN mapping feature.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Loading ...
Loading ...
Loading ...