Loading ...
Loading ...
Loading ...
Chapter 54 Spanning Tree Protocol
XGS2220 Series User’s Guide
389
Figure 301 SWITCHING > Spanning Tree Protocol > RSTP (Stacking Mode)
The following table describes the labels in this screen.
Table 192 SWITCHING > Spanning Tree Protocol > RSTP
LABEL DESCRIPTION
Active Enable the switch button to activate RSTP. Disable the switch to disable RSTP.
Note: You must also activate Rapid Spanning Tree (RSTP) in the SWITCHING >
Spanning Tree Protocol > Spanning Tree Setup screen to enable RSTP on the
Switch.
Bridge Priority Bridge priority is used in determining the root switch, root port and designated port. The Switch
with the highest priority (lowest numeric value) becomes the STP root switch. If all Switches
have the same priority, the Switch with the lowest MAC address will then become the root
switch. Select a value from the drop-down list box.
The lower the numeric value you assign, the higher the priority for this bridge.
Bridge Priority determines the root bridge, which in turn determines Hello Time, Max Age and
Forwarding Delay.
Hello Time This is the time interval in seconds between BPDU (Bridge Protocol Data Units) configuration
message generations by the root switch. The allowed range is 1 to 10 seconds.
Loading ...
Loading ...
Loading ...