Loading ...
Loading ...
Loading ...
Chapter 32 Auto PD Recovery
XGS2220 Series User’s Guide
222
To open this screen, click PORT > Auto PD Recovery.
Figure 161 PORT > Auto PD Recovery (Standalone Mode)
Figure 162 PORT > Auto PD Recovery (Stacking Mode)
The following table describes the labels in this screen.
Table 103 PORT > Auto PD Recovery
LABEL DESCRIPTION
Active Select this option to enable Auto PD Recovery on the Switch.
Slot This field appears only in Stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID
and the second is the port number. Please note that the default stacking ports (the last two
ports of your Switch) cannot be configured. They are reserved for stacking only.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to
set the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Active Select Active to enable Auto PD Recovery on the ports.
Loading ...
Loading ...
Loading ...