Loading ...
Loading ...
Loading ...
Chapter 33 Flex Link
XGS2220 Series User’s Guide
228
33.3.1 Add/Edit Flex Link
To access this screen, click the Add/Edit button or select an entry from the list and click the Add/Edit
button.
Note: A port can only be in one flex link pair. If a port has already been set as a flex link pair’s
primary/backup port, the port can not be used by other flex links. Check the PORT >
Flex Link > Flex Link Setup screen to see what ports are already in other flex link pairs.
Figure 167 PORT > Flex Link > Flex Link Setup > Add/Edit (Standalone Mode)
Figure 168 PORT > Flex Link > Flex Link Setup > Add/Edit (Stacking Mode)
Preemption This displays if Preemption is enabled on the flex link pair. If Preemption is enabled, when the
primary port comes back up, the backup port will go into BLOCKING state and the primary
port will go into FORWARDING state after the Preemption Delay Time interval.
Preemption Delay
Time
This displays the preemption delay time configured for this flex link pair.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entry.
Table 105 PORT > Flex Link > Flex Link Setup (continued)
LABEL DESCRIPTION
Loading ...
Loading ...
Loading ...