Loading ...
Loading ...
Loading ...
Chapter 35 Link Aggregation
XGS2220 Series User’s Guide
236
For example, if your Switch has two link aggregation algorithm types that are currently online. The third
link aggregation algorithm type can only go online when one of the online link aggregation algorithm
type goes offline.
In stacking mode, the stacking channel is using link-aggregation. The default algorithm type is src-dst-
mac, and is not configurable. Therefore, you have only one other algorithm type that can link up at the
same time.
By default, the stacking ports are trunk ports. For example, for a 54-port Switch, the stacking ports 51 and
52, 53 and 54 are two trunk groups.
35.2 Link Aggregation Status
Click PORT > Link Aggregation > Link Aggregation Status in the navigation panel to display the screen as
shown. See Section 35.1 on page 234 for more information.
Figure 171 PORT > Link Aggregation > Link Aggregation Status
The following table describes the labels in this screen.
Table 111 PORT > Link Aggregation > Link Aggregation Status
LABEL DESCRIPTION
Group ID This field displays the group ID to identify a trunk group, that is, one logical link containing multiple
ports.
Enabled Ports These are the ports you have configured in the Link Aggregation Setting screen to be in the trunk
group.
The port numbers displays only when this trunk group is activated and there is a port belonging to
this group.
Synchronized
Ports
These are the ports that are currently transmitting data as one logical link in this trunk group.
Aggregator ID Link Aggregator ID consists of the following: system priority, MAC address, key, port priority and
port number.
The ID displays only when there is a port belonging to this trunk group and LACP is also enabled
for this group.
Loading ...
Loading ...
Loading ...