Loading ...
Loading ...
Loading ...
Chapter 40 ZULD
XGS2220 Series User’s Guide
297
40.3 ZULD Setup
Use this screen to enable ZULD on a port, configure a mode and set the probe time. To open this screen,
click PORT > ZULD > ZULD Setup.
Figure 222 PORT > ZULD > ZULD Setup (Standalone Mode)
Remote MAC Addr This is the MAC address of the port on the connected device to which the port of the
Switch is connected.
Remote Port This is the port number of the port on the connected device to which the port of the Switch
is connected.
Table 137 PORT > ZULD > ZULD Status (continued)
LABEL DESCRIPTION
Loading ...
Loading ...
Loading ...