Loading ...
Loading ...
Loading ...
Chapter 3 Hardware Panels
XGS2220 Series User’s Guide
49
Note: Do NOT pull the transceiver out by force. You could damage it. If the transceiver will not
slide out, grasp the tabs on both sides of the transceiver with a slight up or down motion
and carefully slide it out of the slot. If unsuccessful, contact Zyxel Support to prevent
damage to your Switch and transceiver.
5 Insert the dust plug into the ports on the transceiver and the cables.
Figure 22 Removing the Fiber Optic Cables
Figure 23 Opening the Transceiver’s Latch Example
Figure 24 Transceiver Removal Example
3.1.3 Console Port
Without Access L3 License
With instructions from customer support, This USB Type C connector is for troubleshooting only.
With Access L3 License
When the Access L3 license is activated in your Switch, connect this port to your computer (using an USB
Type C console cable) if you want to configure the Switch using the command line interface (CLI)
through the console port.
3.2 Rear Panel
The following figures show the rear panel of the Switch. The rear panel contains:
Figure 25 Rear Panel: XGS2220-30
Loading ...
Loading ...
Loading ...