Loading ...
Loading ...
Loading ...
Chapter 38 PoE Setup
XGS2220 Series User’s Guide
289
38.3.1 Add/Edit PoE Time Range
To access this screen, click the Add/Edit button or select an entry from the list and click the Add/Edit
button.
Figure 215 PORT > PoE Setup > PoE Time Range Setup > Add/Edit (Standalone Mode)
Figure 216 PORT > PoE Setup > PoE Time Range Setup > Add/Edit (Stacking Mode)
The following table describes the labels in this screen.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new rule or edit a selected one.
Delete Check the rules that you want to remove and then click the Delete button.
Table 134 PORT > PoE Setup > PoE Time Range Setup (continued)
LABEL DESCRIPTION
Table 135 PORT > PoE Setup > PoE Time Range Setup > Add/Edit
LABEL DESCRIPTION
Port The port number identifies the port you are configuring. In stacking mode, the first number
represents the slot ID and the second one is the port number. Please note that the default
stacking ports (the last two ports of your Switch) cannot be configured. They are reserved for
stacking only.
Time Range This field displays the name of the schedule that you have created using the SYSTEM > Time
Range screen.
Select a pre-defined schedule to control when the Switch enables PoE to provide power on
the port. To select more than one schedule, press [SHIFT] and select the choices at the same
time.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Loading ...
Loading ...
Loading ...