Loading ...
Loading ...
Loading ...
RIGOL Chapter 17 Function/Arbitrary Waveform Generator (Option)
17-10 DS8000-R User Guide
number of initial points.
➢ Voltage
Click Voltage, then use the pop-up numeric keypad or scroll with the
mouse to set the voltage value of the current point. Its available range is
from -2.5 V to +2.5 V.
➢ Insert
Click Insert to insert a new editable point between the current editing
point and the next editing point. The number of initial points adds 1
automatically. You can click Insert continuously to increase the editable
points gradually.
➢ Delete
Click Delete to delete the current point from the waveform, and connect
the remaining points with the current interpolation method.
➢ Zoom
Click Zoom continuously to enable or disable the zoom function of
horizontal time base.
➢ Apply
Click Apply to apply the current settings for the currently edited arbitrary
waveforms and output the edited waveforms.
âš« Save the arbitrary waveform
Click Save to enter the file saving interface. Please refer to descriptions in
"Store and Load" to save the currently edited waveform file to the internal or
external memory in "*.arb" format (you can overwrite the original file or save
the currently edited waveform again).
To Edit Waveforms
You can edit the waveforms in the current volatile memory. Click Edit to enter the
waveform editing menu.
âš« Set the frequency or period
Click to select Frequency or Period. For detailed setting methods, refer to
descriptions in "To Output Sine".
âš« Set the amplitude or high level
Click to select Amplitude or High Level. For detailed setting methods, refer to
descriptions in "To Output Sine".
âš« Set the offset and low level
Click to select Offset or Low Level. For detailed setting methods, refer to
descriptions in "To Output Sine".
âš« Linear Interpolation
Click Linear Interp to enable or disable the linear interpolation between the
Loading ...
Loading ...
Loading ...