Loading ...
Loading ...
Loading ...
Chapter 11 Protocol Decoding RIGOL
DS8000-R User Guide 11-5
click on the icon at the upper-right corner of the table to close the
event table.
Figure 11-2 Parallel Decoding Event Table
Note:
âš« When you adjust the horizontal time base, the waveform displayed
on the screen will also change, and the total number of lines
containing the decoding information in the event table will also be
changed.
âš« The displayed decoded data information in the bus is related to the
value of the horizontal time base. Reducing the horizontal time
base can help you view the detailed information.
➢ Set the event table format: Click Format to select the display format of
"Data" in the event table. The available formats include "Hex", "Dec",
"Bin", and "ASC".
➢ Set the view type: Click View to select the form of the event table to
be viewed. The available choices include "Packets", "Details", and
"Payload".
If you select "Packets", the time and decoded data are displayed in the
event table. If you select "Details", the detailed data in the specified
row will be displayed in the event table. If "…" appears in the row of
data, it indicates that the decoded data are not fully displayed. At this
time, you can view the details in the "Packets" view. If you select
"Payload", all data in the specified column will be displayed in the event
table. If "…" appears in the specified column of data, it indicates that
the decoded data are not fully displayed. At this time, you can view the
details in the "Packets" view.
➢ Export: If you select "Packets", then set the operating status of the
Line Number Time Decode Name Decoded Data
Event Table
Parallel Bus
Loading ...
Loading ...
Loading ...