Loading ...
Loading ...
Loading ...
RIGOL Chapter 11 Protocol Decoding
11-22 DS8000-R User Guide
frame ID, CRC, and error information.
➢ Open or close the event table: Click Event Table continuously to
enable or disable the event table. When you enable the event table,
the following figure is displayed, as shown in Figure 11-9. You can click
on the icon
at the upper-right corner of the table to close the event
table. Besides, when the operating status is "STOP", you can select a
specified line and view the corresponding decoding information.
Figure 11-9 LIN Decoding Event Table
Note:
âš« When you adjust the horizontal time base, the waveform displayed
on the screen will also change, and the total number of lines
containing the decoding information in the event table will also be
changed.
âš« The displayed decoded data information in the bus is related to the
value of the horizontal time base. Reducing the horizontal time
base can help you view the detailed information.
➢ Set the event table format: Click Format to select the display format of
"Data" in the event table. The available formats include "Hex", "Dec",
"Bin", and "ASC".
➢ Set the view type: Click View to select the form of the event table to
be viewed. The available choices include "Packets", "Details", and
"Payload". If you select "Packets", the decoded data, time, and error
information are displayed in the event table. If you select "Details", the
detailed data in the specified row will be displayed in the event table. If
"…" appears in the row of data, it indicates that the decoded data are
not fully displayed. At this time, you can view the details in the
"Packets" view. If you select "Payload", all data in the specified column
will be displayed in the event table. If "…" appears in the specified
Line Number Time Frame ID Decoded Data CRC Error
Event Table
LIN Bus
Loading ...
Loading ...
Loading ...