Loading ...
Loading ...
Loading ...
RIGOL Chapter 17 Function/Arbitrary Waveform Generator (Option)
17-8 DS8000-R User Guide
Figure 17-9 Haversine
To Output the Arbitrary Waveform
DS8000-R series oscilloscope allows you to define the arbitrary waveform and save it
to the internal or external memory. The user-defined waveform can contain 2 to
16,384 data points (i.g. 2 pts to 16 kpts).
Click Wave to select "Arb". At this time, you can set the parameters for the arbitrary
waveform.
To Load the Channel and Waveform
1. Load the Channel
Click Load from CH to enter the channel loading menu. You can set the
channel signal required to be loaded.
âš« Channel selection
Click Channel to select the desired channel (CH1-CH4).
âš« Set the waveform range
Click Region continuously to set the waveform in the "Cursor" or "Screen"
region for load. When "Cursor" is selected, click to select Cursor A or
Cursor B, and scroll with the mouse to adjust the positions of the two
cursors respectively. Click to select Cursor AB, and scroll with the mouse
to adjust the positions of cursors A and B at the same time to determine the
waveform range.
âš« Load
Click Load to load the set channel signal.
2. Load the Waveform
Click Load Stored to enter the waveform loading interface. In the disk
Loading ...
Loading ...
Loading ...