Loading ...
Loading ...
Loading ...
Chapter 11 Protocol Decoding RIGOL
DS8000-R User Guide 11-9
LSB MSB
âš« Package
Click Package to enable or disable the package display in data
transmission. When enabled, several data blocks will be combined based on
the separator.
âš« Separator
Click Separator to select the desired package separator in data
transmission. It can be set to 0A(LF), 0D(CR), 20(SP), or 0(NUL).
6
． Display-related setting
Click Display to enter the display setting menu.
âš« Set the display format
Click Format to select the display format of the bus data. The available
display formats of the bus data are "Hex", "Dec", "Bin", and "ASCII".
âš« Adjust the vertical position of the bus
Click Position, and then place the mouse cursor over the menu to scroll
with the mouse or drag the decode label at the left side of the screen to
adjust the vertical display position of the bus.
âš« Set the label display
Click Label to enable or disable the label display of the RS232 decoding bus.
When enabled, the bus label "RS232-TX" and/or "RS232-RX" will be
displayed at the upper-left side of the bus (when the bus display is
enabled).
âš« Event table
Click Event Table to enter the event table setting menu. The event table
displays the detailed decoding information in time order in the form of a
table, so as to better observe the long decoded data. The decoding
information includes the decoded data (Tx and/or Rx), the corresponding
line number, time, and error information (Tx and/or Rx).
Note: When the Tx and Rx source channels are set to "OFF", information of
the data line is not displayed in the data table.
➢ Open or close the event table: Click Event Table continuously to
enable or disable the event table. You can also click on the icon at
the upper-right corner of the table to close the event table. Besides,
Loading ...
Loading ...
Loading ...