Loading ...
Loading ...
Loading ...
To use AirPrint, ensure the following:
●
The printer must be connected to the same network as your AirPrint enabled device. For more
information about using AirPrint and about which HP products are compatible with AirPrint, visit the HP
Mobile Printing website at www.hp.com/go/mobileprinting . If a local version of this website is not
available in your country/region or language, you might be directed to the HP Mobile Printing site in
another country/region or language.
●
Load paper that matches the paper settings of the printer (see Load paper for more information).
Accurately setting the paper size for the paper that is loaded, enables a mobile device to know what
paper size it is printing.
Tips for successful printing
Software settings selected in the print driver only apply to printing, they do not apply to copying or scanning.
You can print your document on both sides of the paper. For more information, see Print on both sides
(duplexing).
Ink tips
●
If the print quality is not acceptable, see Printing issues for more information.
●
Use Original HP cartridges.
Original HP cartridges are designed and tested with HP printers and papers to help you easily produce
great results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs
required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased Original HP cartridges, go to www.hp.com/go/anticounterfeit.
●
Install both the black and color cartridges correctly.
For more information, see Replace the cartridges.
●
Check the estimated ink levels in the cartridges to make sure there is suicient ink.
Ink level warnings and indicators provide estimates for planning purposes only.
For more information, see Check the estimated ink levels.
NOTE: When you receive a low-ink warning message, consider having a replacement cartridge
available to avoid possible printing delays. You do not need to replace the cartridges until print quality
becomes unacceptable.
●
Always turn o the printer by pressing (the Power button) to allow the printer to protect the nozzles.
Paper loading tips
For more information, also see Load paper.
●
Ensure the paper is loaded in the input tray properly, and set the correct media size and media type.
Upon loading paper in input tray, you will be prompted to set the media size and media type.
●
Load a stack of paper (not just one page). All the paper in the stack should be of the same size and type
to avoid a paper jam.
ENWW Tips for successful printing 29
Loading ...
Loading ...
Loading ...