Loading ...
Loading ...
Loading ...
Troubleshoot fax problems
Troubleshoot fax problems Use an HP online troubleshooting wizard.
Resolve problems sending or receiving a fax or faxing to your computer.
NOTE: The HP online troubleshooting wizards may not be available in all languages.
Read general instructions in the Help for specic fax problems
What kind of fax problem are you having?
The display always shows Phone O Hook
●
You are using the wrong type of phone cord. Make sure you are using the 2-wire phone cord that came
with the printer to connect the printer to your phone line. If the phone cord that came with the printer is
not long enough, you can use a longer phone cord to extend the length. You can purchase the cord at an
electronics store that carries phone accessories.
●
Other equipment that uses the same phone line as the printer might be in use. Make sure extension
phones (phones on the same phone line, but not connected to the printer) or other equipment are not in
use or o the hook. For example, you cannot use the printer for faxing if an extension phone is o the
hook, or if you are using a computer dial-up modem to send email or access the Internet.
The printer is having problems sending and receiving faxes
●
Make sure the printer is turned on. Look at the display on the printer. If the display is blank and (the
Power button) light is not lit, the printer is turned o. Make sure the power cord is rmly connected to
the printer and plugged into a power outlet. Press (the Power button) to turn on the printer.
After turning on the printer, HP recommends you wait ve minutes before sending or receiving a fax. The
printer cannot send or receive faxes while it is initializing after being turned on.
●
If HP Digital Fax has been enabled, you might not be able to send or receive faxes if the fax memory is
full (limited by printer memory).
ENWW Fax issues 121
Loading ...
Loading ...
Loading ...