FLUKE 710 mA Loop Valve Tester

User Manual for the Fluke 710 mA Loop Valve Tester - Page 7

For 710.

PDF File Manual, 48 pages, Read Online | Download pdf file

710 photo
Loading ...
Loading ...
Loading ...
709/709H/710
Users Manual
2
Safety Information
A Warning identifies hazardous conditions and procedures that
are dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the
equipment under test.
XW Warning
To prevent possible electrical shock, fire, or
personal injury:
Read all safety Information before you use the
Product.
Use the Product only as specified, or the
protection supplied by the Product can be
compromised.
Examine the case before you use the Product.
Look for cracks or missing plastic. Carefully
look at the insulation around the terminals.
Do not use test leads if they are damaged.
Examine the test leads for damaged insulation
and measure a known voltage.
Do not use and disable the Product if it is
damaged.
Do not use the Product around explosive gas,
vapor, or in damp or wet environments.
Do not touch voltages >30 V ac rms, 42 V ac
peak, or 60 V dc.
Do not apply more than the rated voltage,
between the terminals or between each terminal
and earth ground.
Do not connect directly to mains.
Do not exceed the Measurement Category (CAT)
rating of the lowest rated individual component
of a Product, probe, or accessory.
Keep fingers behind the finger guards on the
probes.
Remove all probes, test leads, and accessories
before the battery door is opened.
Remove the batteries if the Product is not used
for an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are
not removed, battery leakage can damage the
Product.
Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
The battery door must be closed and locked
before you operate the Product.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...