Loading ...
Loading ...
Loading ...
Precision Loop Calibrator
Write LRV and URV Values
27
3. Push to return to the Modify Setup menu. The screen
prompts you to change the loop to AUTOMATIC.
Modify Tags, Msg, Descr
Select the item to modify from the menu. See Figure 36.
Figure 36. Modify Tags, Msg, Descr
The tag name is truncated if too long to fit on one line. The
symbol in the upper right corner flashes to indicate a working
HART connection.
Rotate the selection knob to move the highlight. Push the selection
knob to move to the edit screen. See Figure 37 for an example of a
short tag.
Figure 37. Short Tag
The tag name is truncated if too long to fit on one line. The
symbol in the upper right corner flashes to indicate a working
HART connection.
The character selected for change is indicated by an underline
cursor:
• Short tag is up to 8 characters long from a limited character
set that does not include lower case.
• Long tag is up to 32 characters long from the full character
set.
• Descriptor is up to 16 characters long from a limited character
set that does not include lower case.
• Message is up to 32 characters long from a limited character
set that does not include lower case.
To modify a character:
1. Rotate the selection knob to scroll through the available
character set.
2. Push and hold the selection knob to send the new value to the
HART device and return to the Modify Setup menu.
An error shows if the HART device rejects the value for any
reason.
Tips:
• Push the selection knob to move the cursor one character
to the right.
• Push to move the cursor one character to the left.
• Push to delete the selected character.
• Push to insert a space in front of the selected
character.
• Push to show a help screen.
• Push the selection knob or
on the help screen to
resume the modification at the same position.
• Push
to return to the Modify Setup menu.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...