Loading ...
Loading ...
Loading ...
709/709H/710
Users Manual
16
Auto Shutdown Time
The Auto Shutdown Time function sets or turns off the time
before the Product automatically shuts itself down if the keypad is
not used. The value can be set to Disabled, or from 1 minute to
30 minutes. See Figure 17.
Figure 17. Auto Shutdown Screen
HART Write Enable
HART Write Enable is the last function in the Calibrator Setup
Menu. See Figure 18.
Figure 18. Hart Write Enable Screen
This function is available only on the 709H and 710. It protects the
Write LRV, Write URV, Device Diagnostic, Trim 4mA, Trim 20mA,
Set Fixed Output, and PV Zero functions. The default setting is
ON, but it may be turned off to protect the Product against
unauthorized use.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...