Loading ...
Loading ...
Loading ...
709/709H/710
Users Manual
40
Maintenance
XW Warning
For safe operation and maintenance of the
Product:
• Repair the Product before use if the battery
leaks.
• Be sure that the battery polarity is correct to
prevent battery leakage.
• Remove the input signals before you clean the
Product.
• Use only specified replacement parts.
• Have an approved technician repair the Product.
Clean the Product
Clean the Product and pressure modules with a soft cloth
dampened with water or water and mild soap.
W Caution
To prevent possible damage to the Product:
• Do not use solvents or abrasive cleansers.
• Do not allow water into the case.
Fuse
The Product is protected from overcurrent condition by an internal
self-resetting fuse. The fuse will automatically reset within a few
seconds. The fuse cannot be repaired manually.
Battery Replacement
Replace the batteries when the battery indicator shows on the
display.
To replace the batteries:
1. Turn the Product over so the display is face down.
2. Lift bail to access the battery door. See Figure 60.
3. With a flat-head screwdriver, remove the battery door screws.
4. Remove the batteries.
5. Replace the old batteries. Note the correct polarity as the new
batteries are installed.
6. Attach the battery door.
7. Replace and tighten the two battery door screws.
Figure 60. Battery Replacement
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...