Loading ...
Loading ...
Loading ...
Within the specied interval, repeated authencaon of the
same card number (uploaded by dierent devices) is invalid,
and only one authencaon is performed.
Enable Failed Aempts Limit of Authencaon/Max. Failed
Aempts for Authencaon
Enable to report alarm when the card reading aempts
reach the set value.
Card Reader Type/Card Reader Descripon
Get card reader type and descripon. They are read-only.
4. Click OK.
5. Oponal: Click Copy to, and then select the card reader(s) to
copy the parameters in the page to the selected card reader(s).
Congure Parameters for Alarm Output
Aer adding the access control device, if the device links to alarm
outputs, you can congure the parameters.
Before You Start
Add access control device to the client, and make sure the device
supports alarm output.
Steps
1. Click Access Control → Advanced
Funcon → Device
Parameter to enter access control parameter conguraon
page.
2.
In the device list on the le, click to expand the door, select
an alarm input and you can edit the alarm input's parameters
on the right.
3. Set the alarm output parameters.
Name
Edit the card reader name as desired.
Alarm Output
Acve Time
How long the alarm output will last aer triggered.
4. Click OK.
5. Oponal: Set the switch on the upper right corner to ON to
trigger the alarm output.
Congure Parameters for Lane Controller
Aer adding the lane controller to the client, you can congure its
parameters for passing through the lane.
Before You Start
Add access control device to the client.
Steps
1. Click Access Control → Advanced
Funcon → Device
Parameter to enter Parameter Sengs page.
2. In the device list on the
le, select a lane controller and you
can edit the lane controller's parameters on the right.
3. Edit the parameters.
Passing Mode
Select the controller which will control the barrier status of
the device.
Opening/Closing Barrier Speed
53
Loading ...
Loading ...
Loading ...