Loading ...
Loading ...
Loading ...
Figure 2-2 Hole Posion and System Wiring
4. Bury cables.
Note
●
Interconnecng cable (available for two pedestals and
above): The recommended length is L+1.5 m.
Network communicaon cable: It is recommended to use
CAT5e or the network cable has beer performance.
●
The suggested external diameter of the low voltage conduit
is 30 mm.
●
If more peripherals are required to connect, you should
increase the conduit diameter or bury another conduit for
the external cables.
●
Before digging holes, evaluate the thickness of the
installaon surface to avoid puncturing.
●
When
slong on the installaon surface, pay aenon to
the posion and width of the slot to avoid misalignment of
the barrier.
●
One
distribuon cabinet supplies one pedestal.
The maximum allowable diameter of the power cable is 12
AWG (UL1015), and the transmission distance is 100 m.
One
distribuon cabinet supplies two pedestals.
The maximum allowable diameter of the power cable is 16
AWG (UL1015), and the transmission distance is 25 m.
3 Install Pedestals
Before You Start
Prepare for the installaon tools, check the device and the
accessories, and clear the
installaon base.
Steps
Note
●
The installaon diagram is for illustraon. For details, please
refer to Wiring for video guide.
●
The device should be installed on the concrete surface or other
at non-ammable surfaces.
●
Make sure the device is powered o during installaon and
other
operaons.
●
The
installaon tools are put inside the package of the
pedestal.
3
Loading ...
Loading ...
Loading ...