Hikvision DS-K3BC430LX Quick Start Guide

Loading ...

●

To prevent stainless steel from rusng due to dirt during

construcon, it is recommended that the protecve lm be

removed aer the installaon is completed. There may be

residual adhesive at the lm cung posion. It is

recommended to use WD-40 protecve liquid to wipe aer

tearing the lm.

●

It is recommended that at least two people collaborate to

install the sleeve. You'd

beer wear gloves throughout the

enre process, handle with care, and pay aenon to

prevenng crushing or pinching injuries.

1. Prepare for the installaon tools, check the components, and

prepare for the

installaon base.

2. Seal the boom of the pedestal with sealing materials to

prevent water accumulaon.

3. Remove the protecve panel on the top of the device, and

determine the barrier direcon and the pedestal installaon

posion according to the default barrier opening direcon

mark.

Figure 3-1 Default Barrier Opening Direcon Mark

Note

Do not immerse the pedestal in the water. In special

circumstances, the immersed height should be no more than

150 mm. The boom circuit board can't be immersed.

4. Use a cross screwdriver to remove screws of the decorave

ring and cable protecon panel, and complete wiring.

Loading ...

Hikvision DS-K3BC430LX Pro Swing Gates