Loading ...
Loading ...
Loading ...
Click Conguraon → System → System Sengs → Basic
Informaon to enter the conguraon page.
You can view the device name, language, model, serial No.,
version, IO input, IO output, and local RS-485 number.
You can change Device Name and click Save.
You can view the device capacity, including person, card and
event.
7.5.2 Set Time
Set the device's me zone, synchronizaon mode, server address,
NTP port, and interval.
Click Conguraon → System → System Sengs → Time
Sengs .
Figure 7-4 Time Sengs
Click
Save to save the
sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
Manual
By default, the device
me should be synchronized
manually. You can set the device
me manually or check
Sync. with Computer Time to synchronize the device me
with the computer's me.
Server IP Address/NTP Port/Interval
You can set the server IP address, NTP port, and interval.
7.5.3 Set DST
Steps
1. Click
Conguraon → System → System Sengs → Time
Sengs .
2. Enable DST.
3. Set the DST start me, end me and bias me.
4. Click Save to save the sengs.
7.5.4 Change Administrator's Password
Steps
1. Click
Conguraon → User Management .
2.
Click .
3. Enter the old password and create a new password.
4. Conrm the new password.
5. Click OK.
24
Loading ...
Loading ...
Loading ...