Hikvision DS-K3BC430LX Quick Start Guide

Loading ...

5. Oponal: Click Sengs to set the card issuing parameters. For

details, refer to Issue a Card by Local Mode.

6. Click Inialize to inialize the card enrollment staon or card

reader to make it ready for issuing cards.

7. Click the Card No. column and enter the card number.

Place the card on the card enrollment

staon.

Swipe the card on the card reader.

Manually enter the card number and press the Enter key.

The person(s) in the list will be issued with card(s).

8.4.5 Report Card Loss

If the person lost his/her card, you can report the card loss so

that the card's related access authorizaon will be inacve.

Steps

1. Enter Person module.

2. Select the person you want to report card loss for and click Edit

to open the Edit Person window.

In the Credenal → Card panel, click on the added card to

set this card as lost card.

Aer reporng card loss, the access authorizaon of this card

will be invalid and

inacve. Other person who gets this card

cannot access the doors by swiping this lost card.

Oponal: If the lost card is found, you can click to cancel the

loss.

Aer cancelling card loss, the access authorizaon of the

person will be valid and acve.

5. If the lost card is added in one access group and the access

group is applied to the device already, aer reporng card loss

or cancelling card loss, a window will pop up to nofy you to

apply the changes to the device.

Aer applying to device, these

changes can take eect on the device.

8.4.6 Set Card Issuing Parameters

The client provides two modes for reading a card's number: via

card enrollment staon or via the card reader of the access

control device. If a card enrollment

staon is available, connect it

to the PC running the client by USB interface or COM, and place

the card on the card enrollment to read the card number. If not,

you can also swipe the card on the card reader of the added

access control device to get the card number. As a result, before

issuing a card to one person, you need to set the card issuing

parameters including the issuing mode and related parameters.

When adding a card to one person, click

Sengs to open the

Card Issuing

Sengs window.

Local Mode: Issue Card by Card Enrollment

Staon

Connect a card enrollment staon to the PC running the client.

You can place the card on the card enrollment

staon to get the

card number.

Card Enrollment Staon

Select the model of the connected card enrollment staon

Loading ...

Hikvision DS-K3BC430LX Pro Swing Gates

Quick Start Guide - Page 58