Loading ...
Loading ...
Loading ...
Note
●
The displayed parameters may vary for dierent access
control devices.
●
Some of the following parameters are not listed in the Basic
Informaon page, click More to edit the parameters.
Name
Edit the card reader name as desired.
Exit
Buon Type
You can set the exit buon as remaining closed or remaining
open. Usually, it is remaining open.
Open
Duraon
The door contact can be enabled with appropriate delay
aer person with extended access needs swipes her/his
card.
5. Click OK.
6.
Oponal: Click Copy to , and then select the door/oor(s) to
copy the parameters in the page to the selected doors/oor(s).
Note
The door or oor's status duraon sengs will be copied to the
selected door/oor(s) as well.
Congure Parameters for Card Reader
Aer adding the access control device, you can congure its card
reader parameters.
Before You Start
Add access control device to the client.
Steps
1. Click Access Control → Advanced
Funcon → Device
Parameter .
2.
In the device list on the
le, click to expand the door, select a
card reader and you can edit the card reader's parameters on
the right.
3. Edit the card reader basic parameters in the Basic
Informaon
page.
Note
●
The displayed parameters may vary for dierent access
control devices. There are part of parameters listed as
follows. Refer to the user manual of the device for more
details.
●
Some of the following parameters are not listed in the Basic
Informaon page, click More to edit the parameters.
Name
Edit the card reader name as desired.
Card Authencaon Interval
The me interval between two connuous card recognions
when authencang.
Repeated Authencaon Interval
52
Loading ...
Loading ...
Loading ...