Hikvision DS-K1T105AE User Manual

Loading ...

6) Oponal: Select the person/card group(s), and then click Delete to delete it(them).

7) Oponal: Select the person/card group(s), and then click Apply to re-apply access group that

failed to be applied previously to the access control device.

Select an access control point (door) of selected device on the le panel.

Enter the maximum interval when entering password.

Add an authencaon group for the selected access control point.

1) Click Add on the Authencaon Groups panel.

2) Select a congured template as the authencaon template from the drop-down list.

Note

For seng the template, refer to Congure Schedule and Template .

3) Select the authencaon type as Local Authencaon, Local Authencaon and Remotely

Open Door, or Local Authencaon and Super Password from the drop-down list.

Local Authencaon

Authencaon by the access control device.

Local Authencaon and Remotely Open Door

Authencaon by the access control device and by the client. When the person swipes the

card on the device, a window will pop up. You can unlock the door via the client.

Figure 7-5 Remotely Open Door

Note

You can check Oine Authencaon to enable the super password authencaon when

the access control device is disconnected with the client.

Local Authencaon and Super Password

Authencaon by the access control device and by the super password.

4) Select the added person/card group in the le list below and it will be added to the Selected

list on the right as the authencaon group.

Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T105AE Pro Series Card Terminal