Hikvision DS-K1T105AE User Manual

Loading ...

Chapter 5 Acvaon

You should acvate the device before the rst login. Aer powering on the device, the system will

switch to Device Acvaon page.

Acvaon via the device, SADP tool and the client soware are supported.

The default values of the device are as follows:

●

The default IP address: 192.0.0.64

●

The default port No.: 8000

●

The default user name: admin

5.1 Acvate via Device

If the device is not acvated before rst login, the system will enter the Device Acvaon interface

aer powering on.

Steps

Create a device password for acvaon.

Conrm the password.

Note

Press the up or down key on the keypad to change the input method.

Press OK to acvate the device.

Note

We highly recommend you to create a strong password of your own choosing (using a minimum

of 8 characters, including at least three kinds of following categories: upper case leers, lower

case leers, numbers, and special characters) in order to increase the security of your product.

And we recommend you change your password regularly, especially in the high security system,

changing the password monthly or weekly can beer protect your product.

What to do next

Aer the device acvaon, you will enter the administrator adding page. Add an administrator

before other operaons.

5.2 Acvate via SADP

SADP is a tool to detect, acvate and modify the IP address of the device over the LAN.

Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T105AE Pro Series Card Terminal