Hikvision DS-K1T105AE User Manual

Loading ...

Note

●

The displayed parameters may vary for dierent access control devices.

●

Some of the following parameters are not listed in the Basic Informaon page, click More to

edit the parameters.

Name

Edit the card reader name as desired.

Door Contact

You can set the door sensor as remaining closed or remaining open. Usually, it is remaining

closed.

Exit Buon Type

You can set the exit buon as remaining closed or remaining open. Usually, it is remaining

open.

Door Locked Time

Aer swiping the normal card and relay acon, the mer for locking the door starts working.

Door Le Open Timeout Alarm

The alarm can be triggered if the door has not been closed in a congured me period. If it is

set as 0, no alarm will be triggered.

Super Password

The specic person can open the door by inpung the super password.

Duress Code

The door can open by inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Dismiss Code

Create a dismiss code which can be used to stop the buzzer of the card reader (by entering

the dismiss code on the keypad).

Note

●

The duress code, super code, and dismiss code should be dierent.

●

The duress code, super password, and the dismiss code should be dierent from the

authencaon password.

●

The length of duress code, super password, and the dismiss code is according the device,

usually it should contains 4 to 8 digits.

Click OK.

Oponal: Click Copy to , and then select the door to copy the parameters in the page to the

selected doors.

Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T105AE Pro Series Card Terminal