1. Home
  2. Hikvision
  3. Hikvision DS-K1T105AE User Manual
  4. Page 143

Hikvision DS-K1T105AE Pro Series Card Terminal

User Manual - Page 143

For DS-K1T105AE.

PDF File Manual, 150 pages, Read Online | Download pdf file

DS-K1T105AE photo
Loading ...
Loading ...
Loading ...
4.
Set the Wi-Fi Security Mode from the drop-down list.
5.
Oponal: Click Refresh to refresh the network status.
6.
Oponal: Set WLAN parameters.
1) On the Wi-Fi Sengs page, click WLAN to enter the WLAN page.
2) Uncheck DHCP and set the IP address, the subnet mask, the default gateway, the MAC
address, the DNS1 IP Address, and the DNS2 IP address.
7.
Click Save.
7.12.11 Set Relay Parameters
Click Maintenance and Management → Device to enter the device list.
Click to enter the remote conguraon page.
Click Alarm → Relay . Select a relay and click and set the relay name and output delay me.
Click OK to save the sengs.
7.12.12 Set Access Control Parameters
Steps
1.
On the Device for Management page, click → Others → Access Control Parameters to enter
the Access Control Parameters tab.
2.
Check the checkbox to enable the funcon.
Voice Prompt
If you enable this funcon, the voice prompt is enabled in the device. You can hear the voice
prompt when operang in the device.
3.
Click Save.
7.12.13 Set CPU Card Reading Mode
Steps
1.
On the Device for Management page, click → Others → CPU Card Reading Sengs to enter
the CPU Card Reading Sengs tab.
2.
Select a reading mode from the dropdown list.
3.
Click Save.
7.12.14 Congure Volume Input or Output
Steps
1.
On the Device for Management page, click → Image → Audio Input or Output to enter Audio
Input or Output tab.
2.
Move the block to adjust the device output volume.
Access Control Terminal User Manual
128
Loading ...
Loading ...
Loading ...