Hikvision DS-K1T105AE User Manual

Loading ...

Chapter 4 Wiring

The device supports connecng to the RS-485 terminal, the door lock, the exit buon, the alarm

output/input devices, the Wiegand card reader, the access controller, and the power supply. You

can wire the peripherals according to the descripons below.

If connect the Wiegand card reader with the access controller, the face recognion terminal can

transmit the authencaon informaon to the access controller and the access controller can

judge whether to open the door or not.

Note

●

If the cable size is 18 AWG, you should use a 12 V switched-mode power supply. And the

distance between the power supply and the device should be no more than 20 m.

●

If the cable size is 15 AWG, you should use a 12 V switched-mode power supply. And the

distance between the power supply and the device should be no more than 30 m.

●

If the cable size is 12 AWG, you should use a 12 V switched-mode power supply. And the

distance between the power supply and the device should be no more than 40 m.

4.1 Terminal Descripon

You can view the terminal names of the access control terminal and their detailed informaon,

including the terminal funcon, cable color, terminal name, etc.

The terminals diagram is as follows:

Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T105AE Pro Series Card Terminal