Hikvision DS-K1T105AE User Manual

Loading ...

DST

On the Device for Management page, click Remote Conguraon → System → Time → DST to

enter the DST tab.

Enable DST and you can edit the DST bias me, the DST start me, and end me.

Click Save.

7.12.4 System Maintenance

You can reboot the device, restore the device to the default sengs, and upgrade the device.

Reboot

On the Device for Management page, click → System → System Maintenance to enter the

System Maintenance tab.

Click Reboot and the device starts reboong.

Restore Default Sengs

On the Device for Management page, click Remote Conguraon → System → System

Maintenance to enter the System Maintenance tab.

Restore Default

The parameters will be restored the default ones, excluding the IP address.

Restore All

All device parameters will be restored to the default ones. The device should be acvated aer

restoring.

Upgrade

On the Device for Management page, click Remote Conguraon → System → System

Maintenance to enter the System Maintenance tab.

Select a device type from the drop-down list, click Browse and select an upgrade le from the local

computer, and click Upgrade.

Note

●

If you select Card reader as the device type, you should also select a card reader No. from the

drop-down list.

●

The upgrade will lasts for about 2 min. Do not power o during the upgrading. Aer upgrading,

the device will reboot automacally.

7.12.5 Congure RS-485 Parameters

You can set the RS-485 parameters including the baud rate, data bit, stop bit, parity type,

communicaon mode, work mode, and connecon mode.

Access Control Terminal User Manual

125

Loading ...

Hikvision DS-K1T105AE Pro Series Card Terminal