Hikvision DS-K1T105AE User Manual

Loading ...

Cauon

●

Be careful to click Apply All to Devices, since this operaon will clear all the access groups

of the selected devices and then apply the new access group, which may brings risk to the

devices.

●

You can click Apply Changes to Devices to only apply the changed part of the selected

access group(s) to the device(s).

3) View the apply status in the Status column or click Applying Statusto view all the applied

access group(s).

The selected persons in the applied access groups will have the authorizaon to enter/exit the

selected doors/door staons with their linked card(s) or ngerprints.

Oponal: Click to edit the access group if necessary.

7.7 Congure Advanced Funcons

You can congure the advanced funcons of access control to meet some special requirements in

dierent scene.

Note

●

For the card related funcons(the type of access control card), only the card(s) with access group

applied will be listed when adding cards.

●

The advanced funcons should be supported by the device.

●

Hover the cursor on the Advanced Funcon, and then Click to customize the advanced

funcon(s) to be displayed.

7.7.1 Congure Device Parameters

Aer adding the access control device, you can congure the parameters of access control device,

access control points.

Congure Parameters for Access Control Device

Aer adding the access control device, you can congure its parameters, including overlaying user

informaon on picture, uploading pictures aer capturing, saving captured pictures, etc.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

Note

If you can nd Device Parameter in the Advanced Funcon list, Hover the cursor on the

Advanced Funcon, and then Click to select the Device Parameter to be displayed.

Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T105AE Pro Series Card Terminal