1. Home
  2. Hikvision
  3. Hikvision DS-K1T105AE User Manual
  4. Page 89

Hikvision DS-K1T105AE Pro Series Card Terminal

User Manual - Page 89

For DS-K1T105AE.

PDF File Manual, 150 pages, Read Online | Download pdf file

DS-K1T105AE photo
Loading ...
Loading ...
Loading ...
2.
Select an access device to show its parameters on the right page.
3.
Turn the switch to ON to enable the corresponding funcons.
Note
●
The displayed parameters may vary for dierent access control devices.
●
Some of the following parameters are not listed in the Basic Informaon page, click More to
edit the parameters.
Voice Prompt
If you enable this funcon, the voice prompt is enabled in the device. You can hear the voice
prompt when operang in the device.
Enable NFC Card
If enable the funcon, the device can recognize the NFC card. You can present NFC card on
the device.
Enable M1 Card
If enable the funcon, the device can recognize the M1 card. You can present M1 card on the
device.
Enable EM Card
If enable the funcon, the device can recognize the EM card. You can present EM card on the
device.
Enable CPU Card
Reserved. If enable the funcon, the device can recognize the CPU card. You can present CPU
card on the device.
Enable ID Card
Reserved. If enable the funcon, the device can recognize the ID card. You can present ID
card on the device.
4.
Click OK.
5.
Oponal: Click Copy to, and then select the access control device(s) to copy the parameters in
the page to the selected device(s).
Congure Parameters for Door
Aer adding the access control device, you can congure its access point parameters.
Steps
1.
Click Access Control → Advanced Funcon → Device Parameter .
2.
Select an access control device on the le panel, and then click
to show the doors of the
selected device.
3.
Select a door to show its parameters on the right page.
4.
Edit the door or oor parameters.
Access Control Terminal User Manual
74
Loading ...
Loading ...
Loading ...